Core Warming of COVID-19 Patients

Participants will be randomized in a 1:1 fashion to core warming with the study device (ensoETM) or to standard of care (standard temperature management and treatment). The device will be used as indicated (for warming). Patient temperature measurement will be collected for both the core warming and standard of care arms during the study period (72 hours). Core warming will be performed using standard technique per instructions for use for the esophageal heat transfer device. The esophageal heat transfer device will be set to 42°C temperature after initial placement, and maintained at 42°C for the duration of treatment. It is expected that patient temperature will increase from baseline by 1°C to 2°C, but due to ongoing heat loss from the patient, the expected maximum patient temperature is below 39°C. The time course of illness of COVID-19 is such that most patients no longer have fever by the time of mechanical ventilation. If patient temperature increases above this range and reaches 39.8°C, the device will be set to an operating temperature of 40°C, thereby preventing any further increase in patient temperature (ambient heat loss precludes patient from reaching device operating temperature). Control group patients will be managed as per standard of care currently utilized in the ICU, which will include the use of other methods of temperature management as warranted. This would include warming with a forced air blanket only in hypothermic patients (core temperature \< 36°C) or antipyretic therapy for febrile patients, as requested by the treating physician. Episodes of hypothermia are infrequent and transient in this population, and the current standard of care generally utilizes a permissive approach to fever (allowing patients to remain mildly febrile) which will continue in the control group without modification (no intentional elevation of temperature will be provided in the control group). Follow up data will be collected at 1 month following enrollment.